
Add to Cart
Antirust Stainless Steel Automatic Orange Juicer Machine for Restaurant
Konmax Orange Juicer Machine Description:
Konmax Orange Juicer Machine Application:
Commercial orange juicer can be used in wide range like bar,restaurant,drink shop , home ,supermarket ,gymnasium,entertainment ,hospital etc
Konmax Orange Juicer Machine Specification:
1.Power supply:220--230V 50HZ /110--120V 60HZ
2.Power consumption:370W
3.Size of orange required:40--90mm
4.Output: 35-40 oranges/per minute
5.Machine Size: 665L*500W*1760H mm
6.Net Weight:92kg
7.Security:Safety cut out switches
The machines will stop operating without the cover place.
8. ConVeyance: Qty/20' FCL: 24 sets
Material | Stainless steel | Delivery time | 20FT: 10days; 40HQ: 15days |
Width | 500MM | Length | 665MM |
Height | 1760MM | Model | XC-2000C |
orange size | 40--90mm | Output | 35-40 oranges/ mins |
Package size | 675*510*1770MM | Certificate | CE approval available |
Electrics Standard | 110V-220V,50-60HZ | Power | 370W |
G.W | 98KG | N.W | 92KG |
40' HQ loading | 58PCS | FOB Shanghai | USD |
20' FT loading | 24PCS | Warranty | 1 Year |
Konmax Orange Juicer Machine Detailed Photo:
Konmax Orange Juicer Machine Accessory:
Two protruding balls ,blade compages ,concave squeezer ,peelers ,peeler seats ,plastic veils ,pressing screw ,two concave balls .
Konmax Orange Juicer Machine Operation Instruction:
1.Make sure the power pressure is 110v/60hz or 220v/50hz .Electrical outlet needs to be above 10AMP
and have grounded power .
2..Put 2 pcs peg in the net and blade of the machine , screw the nut and close the cover .
3.This machine is not workable for the fruit with hard core or less moisture , such as peanut and banana .
4..Use the enclosed feed stick but not other stick to avoid damage the machine .
5. Keep the residue outlet un-blocked .
6..Do not clean the outside of the machine by water directly to avoid electricity leakage or other accident .
7.Turn off the power and pull out plug before washing the machine .
Konmax Orange Juicer Machine Cleaning Instruction:
1.Begin by unplugging the juicer.
2.Disassemble the juicer completely.
3.Dump the bin or container that catches the pulp and scrape it out with a spatula.
4.Rinse each piece under running water.
5.Use the small brushes to clean the small areas, there are small brushes available such as nail brushes
that can be used to clean the nooks and crannies
6.For more thorough cleanings, fill the sink with water and add dish soap.
7.Soak each piece for a few minutes and then wash with a brush or soft cloth.
8.Pay special attention to the mesh strainer as this can quickly build up with pulp and juice debris. Do not
allow the juice particles to dry in this fine screen or they will be difficult to remove
9.Use a soft cloth or sponge moistened with water to wipe down the machine itself. Although the juice is
designed to go through a certain route in the juicer, juice and pulp will end up everywhere.
10.Allow all of the pieces to dry completely. It is fine to set them on a towel or drying rack.
11.Reassemble the juicer.
Konmax Orange Juicer Machine Youtube Link Please check :